Downloads & Updates

※ Download: Pioneer bd-rw bdr-td03 firmware update

This method allows you to save your time and correctly install all necessary drivers, not being afraid to make a mistake during a manual installation. Be attentive to download software for your operating system. Did you ever find a solution to the problem have you found like me that it plays some movies but not others?

Let the driver install and then check the functionality. This problem is both confusing and frustrating, and I am in the process of talking to Sony, via emails about the issue. Before downloading any firmware updates, verify that your model number and current firmware revision match.

Community - Top quality writing Our chassis' design maximizes disc stability and write quality by reducing warping at high speed caused by disc vibration, especially on the outer areas of the disc.

Method 2: Install driver in compatibility mode 1. Let the driver bd-rw and pioneer check the functionality. So the system bios finds the drive, just not Win 10. Their online post said it was fixed when they plugged the sata cable into another sata connector on the motherboard. This also worked for me. First I switched the cables at the backs of the drives. Then I connected them differently bdr-td03 the motherboard. My Biostar board updare six sata connections configured in three pairs. I had to update both of the blu-ray drives into one of the grouped pairings and then Windows bd-rs was able to find them both. I have no idea why it has to be this way for Windows 10; Windows 7 was not this picky. When I upgraded to Windows 10 I noticed it would read discs but was not seen by three different burning applications but the device was listed in device manager. Please note that all three of the burner applications I use are freeware so a commercial burner application may not have this issue. I went through the ordeal of lens cleaning which didn't change much, tried downloading more recent drivers from Pioneer's site good luck with that and eventually realised that when I remove the drive from Device manager and then scan for hardware changes it starts working just fine - at least until next boot when I had to repeat the procedure.

how to chang the dvd writer lens
But, it cant be a hardware problem, because, I had the same situation, before that situation I formatted the laptop the drive was definitely ok before format and also, if the drive was bad, was it possible to install Windows? I've read something about updating the firmware, so, I've tried to update the drive from the device manager, from the Pioneer company website no such BluRay in there , from Sony web site no drive as well , and the Internet in general, but no luck. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. From there you can search for a driver download for your hardware. Below is a list of drivers that may be suitable for your device. So the system bios finds the drive, just not Win 10. My Biostar board has six sata connections configured in three pairs. Pioneef will not take responsibility for drive failures due to improper firmware updates or acts of nature that cause a power failure the update process. Cheers Roy I know this problem like my palms!